Installation of Wpc wood fiber wallboard
The installation process of Wpc wood fiber wallboard involves several steps to ensure the correctness and aesthetics of the installation.
First, check whether the wall to be installed is smooth and clear any obstacles.
Install keel, use light steel or solid wood material, spacing of about 50 cm.
Find the level base of the wall to be installed, and mark the four sides of the wall with lines.
Install the first bottom plate from the corner, use stainless steel self-tapping screws or strong tapping screws to fix one screw every 50 cm, the nail eye on the board is 1.5 cm away from the upper edge of the board.
Fix the second piece of fiber wood grain hanging board, and overlap with the first piece of fiber wood grain hanging board 2-3 cm, and so on from the bottom up to install the fiber wood grain board.
Reserve 3 mm joint for horizontal and horizontal joints, use a coated polyurethane (PU25) or tile adhesive to patch the seams.
The wall board should be naturally close to the inner corner or outer corner, leave appropriate gaps, with glue or tile adhesive for sealing treatment.
When installing to the door and window, cut wood grain fiberboard of corresponding shape and size according to the shape lofting and install, and glue or fill the joint with tile adhesive to avoid water leakage caused by through joint.
After installation, use a clean brush or towel to wipe the dust or oil off the wood fiber board.
Apply acrylic exterior wall paint, two coats for added protection and beauty.
Self-tapping nails should use countersunk self-tapping nails, the nail head should be sunk into the wood grain fiber board 0.5-1 mm. for special places, apply some anti-rust paint and smooth the nail eyes with putty. dry well and smooth with sandpaper before brushing.
Through the above steps, can ensure the correct installation of Wpc wood fiber wallboard, so as to achieve beautiful and practical results.
